Creating a Numerical Table from Two
Functions (TABLE)
TABLE generates a numerical table based on one or two functions. You
can use the function
f
(
x
) or the two functions
f
(
x
) and
g
(
x
). See
"Configuring the Calculator Setup" for more information.
Perform the following steps to generate a numerical table.
1. Press
(TABLE) to enter the TABLE Mode.
2. Use the X variable to input two functions, one in the format
f
(
x
) and the
other in the format
g
(
x
).
• Be sure to input the X variable (
(X)) when generating a
numerical table. Any variable other than X is handled as a constant.
• If you are using a single function, input a function in the format
f
(
x
)
only.
• The following cannot be used in the function: Pol, Rec.
3. In response to the prompts that appear, input the values you want to
use, pressing
after each one.
For this prompt:
Input this:
Start?
Input the lower limit of X (Default = 1).
End?
Input the upper limit of X (Default =
5).
Note:
Make sure that the End value is
always greater than the Start value.
44
Содержание fx-82ZA PLUS
Страница 64: ...2020 CASIO COMPUTER CO LTD...
