153
Other Playback Functions (PLAY MENU)
• Display a snapshot before performing this operation.
When the date and time settings are what you want, align the cursor with “Apply” and
then press [SET] to apply them.
• To switch between 12-hour and 24-hour timekeeping, move the cursor to “am (pm)”
and “24h” (one of which will be displayed) and then use [
8
] and [
2
] to change the
setting.
NOTE
• The date and time stamped into an image using the Timestamp (page 195) cannot
be edited.
• You cannot edit the date and time of an image that is protected.
• You can input any date from 1980 to 2049.
• Display a snapshot before performing this operation.
1.
Use [
8
] and [
2
] to select “Rotate” and then press [SET].
Each press of [SET] will rotate the displayed image 90 degrees left.
2.
When the displayed image is at the orientation you want, press
[MENU].
NOTE
• Rotating a CS image causes all of the images in the CS group to be rotated. You
cannot rotate individual component image in a CS group.
• Rotation of a panorama image is not supported.
• Note that this procedure does not actually change the image data. It simply alters
how the image is displayed on the camera’s monitor screen.
• An image that has been protected or zoomed cannot be rotated.
• The original (unrotated) version of the image will be displayed on the image menu
screen.
Editing the Date and Time of an Image (Date/Time)
Menu item :
Date/Time
[
8
] [
2
]
Changes the setting at the cursor location.
[
4
] [
6
]
Moves the cursor between settings.
Rotating an Image (Rotation)
Menu item :
Rotation
