62
SHOOTING A SNAPSHOT
NOTE
•
The apert
u
re
v
al
u
e indicates the size of the opening that
lets light into the camera. A larger apert
u
re
v
al
u
e indicates
a smaller opening. The camera adj
u
sts this setting
a
u
tomatically.
•
Sh
u
tter speed indicates the amo
u
nt of time that light is
allo
w
ed into the camera. A slo
w
er sh
u
tter speed means
that light is allo
w
ed in for a longer time. Sh
u
tter speed is
indicated on the monitor screen as seconds (1/1000
second, etc.) The camera adj
u
sts this setting a
u
tomatically.
If the image does not focus...
If the foc
u
s frame stays red and the operation lamp is flashing
green, it means that the image is not in foc
u
s (
b
eca
u
se the
s
ub
ject is too close, etc.). Point the camera at the s
ub
ject and try
to foc
u
s again.
Checking a Snapshot
A snapshot
w
ill remain on the monitor screen for a short
w
hile
after yo
u
shoot it and then disappear
w
hen the camera gets
ready for the next image.
Perform the follo
w
ing operation to
v
ie
w
a snapshot after yo
u
shoot it.
Press [
].
This
w
ill display the snapshot yo
u
j
u
st shot.
Use [
W
] and [
X
] to scroll thro
u
gh other images in memory.
To ret
u
rn to the REC mode, press [
].
