109
USING BEST SHOT
NOTE
•
Registering a snapshot creates a snapshot setup, while
registering a movie creates a movie setup. A snapshot
setup can be used to shoot snapshots only, and a movie
setup can be used to shoot movies only.
•
You can check the settings of the currently selected BEST
SHOT scene by displaying the camera’s setting menus and
looking at its settings.
•
User BEST SHOT scenes are assigned numbers in the
sequence: U1, U2, U3, and so on.
•
The following are the settings that are included in a user
snapshot scenes:
Face Recognition, Focus, EV Shift, White Balance, Flash,
ISO, Metering, Flash Intensity, Flash Assist, Color Filter,
Sharpness, Saturation, Contrast
•
The following are the settings that are included in a user
movie scene:
Focus, EV Shift, White Balance, Color Filter, Sharpness,
Saturation, Contrast
•
You can store up to 999 BEST SHOT user scenes.
•
User BEST SHOT scenes are stored in built-in memory
(page 262) in the SCENE folder (snapshots) or MSCENE
folder (movies).
Deleting a BEST SHOT User Scene
Perform the following steps when you want to delete a BEST
SHOT user scene.
1.
Use the mode dial to select “
” (BEST
SHOT) or “
” (MOVIE BEST SHOT), and then
press [SET].
2.
Slide the zoom controller towards [
] or
[
] to display its explanation screen.
3.
Use [
W
] and [
X
] to select the BEST SHOT user
scene you want to delete.
4.
Press [
T
] (
).
