89
Other Settings (Set Up)
Procedure
[MENU]
*
“Set Up” Tab
*
Sounds
• Setting a volume level of 0 mutes output.
Procedure
[MENU]
*
“Set Up” Tab
*
Startup
Display the image you want to use as your startup image and then select “On”.
• The startup image does not appear when you turn on the camera by pressing
[
p
] (PLAY).
• You can specify a snapshot you recorded as the startup image, or you can use the
special startup image provided in the camera’s built-in memory.
• Formatting built-in memory (page 95) will delete the current startup image setting.
Configuring Camera Sound Settings (Sounds)
Startup
Specifies the startup sound.
Sound 1 - 5: Built-in sounds (1 through 5)
Off: Sound off
Half Shutter
Shutter
Operation
Operation
Specifies the sound volume.
Play
Specifies the volume of movie audio output.
Configuring a Startup Image (Startup)
=
=