35
Snapshot Tutorial
2.
Use [
8
] and [
2
] to select the setting you want to change.
This will select one of the control panel icons and display its settings.
*
1
3.
Use [
4
] and [
6
] to change the setting.
4.
If you want to configure another setting, repeat steps 2 and 3.
5.
After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
NOTE
• You also can use on-screen menus to configure settings other than those listed
above (page 92).
Using the Control Panel
The control panel can be used to configure camera settings.
1.
In the REC mode, press [
8
].
1
Exposure mode (page 36)
2
Image size/Quality
*
2
3
ISO sensitivity (page 42)
4
White balance (page 43)
5
EV shift (page 44)
6
AF area (page 45)
7
Not displayed in this mode
8
Flash (page 46)
9
Date/Time (page 48)
*1
Items displayed in the control panel depend on the recording mode.
*2
Image quality cannot be changed using the control panel.
[SET]
[
8
] [
2
] [
4
] [
6
]
1
9
5
3
4
7
8
2
6
Control panel