133
Using the Camera with a Computer
.
Precautions for Windows Users
• Except for Adobe Reader, the bundled software requires Administrator privileges to
run.
• Operation on a self-made computer is not supported.
• Operation may not be possible under certain computer environments.
You can connect the camera to your computer in order to view and store images
(snapshot and movie files).
.
To connect the camera to your computer and save files
1.
Turn on the camera and press [MENU].
2.
On the “Set Up” tab, select “USB” and then press [
6
].
3.
Use [
8
] and [
2
] to select “Mass Storage”, and then press [SET].
4.
Turn off the camera and then use the USB cable that comes with the
camera to connect it to your computer.
• The camera does not draw power over the USB cable. Check the battery level
before connecting and make sure it is not too low.
• Make sure that you insert the cable connector into the USB/AV port until you
feel it click securely into place. Failure to insert the connector fully can result in
poor communication or malfunction.
Viewing and Storing Images on a Computer
USB port
USB cable
Making sure that the
6
mark on the camera is
aligned with the
4
mark of the USB cable
connector, connect the cable to the camera.
USB/AV port
Large connector
Small connector
Terminal cover