Basic Operations
This section provides an overview of the watch
and its operations.
Note
●
The illustrations included in this
operation guide have been created
to facilitate explanation. An
illustration may differ somewhat
from the item it represents.
General Guide
3
0
③ ④
⑤
⑩
⑥
⑦ ⑧ ⑨
②
①
A
Battery indicator
Shows the watch’s charge status as one of
seven levels. The indicator hand points to the
watch’s current charge level.
B
Hour and minute hands
Indicate the current time in your current
location (Home City).
C
R mark
When the watch is standing by for connection
with a phone, the day of the week hand points
to “R”.
D
Day of the week hand
Indicates the day of the week in your current
location (Home City).
E
Small hour and minute hands
Indicate the current time in your World Time
(Dual Time) City.
F
Second hand
Indicates the current second in your current
location (Home City).
G
Small 24-hour hand
Indicates the current 24-hour time in your
World Time (Dual Time) City. Points to the A-
side for a.m. times, and to the P-side for p.m.
times.
H
P-A mark
Used when configuring current time settings
in your current location (Home City). “A”
indicates an a.m. time setting, while “P”
indicates a p.m. time setting.
I
Day
Indicates the current day in your current
location (Home City).
J
e
mark
When the watch is connected with a phone,
the day of the week hand points to
e
.
Using the Crown
The watch’s crown is a screw-in (screw lock)
type. To use the crown, you first need to rotate
it towards you (leftwards) to loosen it.
Loosen
Crown
●
Pulling Out and Pushing In the Crown
Before performing a crown operation, you
need to pull it out to the first or second click as
shown in the figure below. Do not pull the
crown with too much force.
First click
Normal timekeeping
Second click
Important!
●
To prevent loss of water resistance
and/or damage due to impact, be
sure to screw the crown in by rotating
it away from you as you push it in.
Screw in
●
When pushing the crown back in,
take care not to apply too much
force.
●
Fast Forward/Fast Reverse
After pulling out the crown, rotating it quickly
in succession in either direction will start a fast
forward or fast reverse operation. While a fast
forward or fast reverse hand operation is in
progress, quickly rotating the crown in
succession again will increase the speed even
further.
●
Stopping Fast Forward/Fast Reverse
Rotate the crown in the direction opposite that
of the ongoing operation or press any button.
Note
●
If you do not perform any operation
for about nine minutes after pulling
out the crown, crown operations will
automatically become disabled. If
that happens, push the crown back
in and then pull it out again.
Hands and the Day Indicator
30
Day indicator
Day of the week hand
Battery indicator
●
Battery Indicator and Day Indicator
Movement
Changing the day setting of the watch will also
cause the battery indicator hand to move in
conjunction with the day indicator.
●
Hour and Minute Hand Operation
The minute hand of this watch moves in
conjunction with second hand movement.
●
Day
●
It can take anywhere from about 90 seconds
to three minutes for the day indicator to
change after timekeeping reaches
midnight. The battery indicator hand will
move as the day indicator changes.
●
The day may not be indicated correctly while
the watch’s crown is pulled out.
Operation Guide 5467
2
