EN-64
Getting Ready
Connect commercially available headphones to the
PHONES
jacks. Connecting headphones to either of
the
PHONES
jack cuts off output to the speakers,
which means you can practice even late at night
without bothering others. To protect your hearing,
make sure that you do not set the volume level too high
when using headphones.
•
Be sure to push the headphones plug into the
PHONES
jacks as far as it will go. If you don’t, you
may hear sound from only one side of the
headphones.
•
If the plug of the headphones you are using does not
match the
PHONES
jacks, use the applicable
commercially available adaptor plug.
•
If you are using headphones that require an adaptor
plug, make sure you do not leave the adaptor
plugged in when you unplug the headphones. If you
do, nothing will sound from the speakers when you
play.
•
Plugging headphones into the
PHONES
jacks
automatically optimizes the timbre of notes for
headphones listening, and applies Headphone
Mode settings.
The Headphone Mode reproduces the natural expanse
of sound that reaches the ears when an acoustic piano
is played.
•
The Headphone Mode is enabled only while
headphones are being used.
•
If external output is used while headphones are
plugged into the PHONE jack, the external output
sound is also the result of Headphone Mode
compensation.
•
The Headphone Mode is enabled under initial
default settings. To disable the Headphone Mode,
see “Configuring Settings” on page EN-40, and
“General”
3
“Headphone Mode” in the
“Parameter List” on page EN-41.
You can connect audio equipment or a music amplifier
to the Digital Piano and then play through external
speakers for more powerful volume and better sound
quality.
• The Digital Piano’s Master EQ setting lets yo
u
specify either of two tim
b
res:
bu
ilt-in speaker tim
b
re
or
LINE OUT
tim
b
re.
When listening with the
bu
ilt-in speakers:
Selecting the “Speaker” Master EQ setting changes
to
bu
ilt-in speaker tim
b
re.
N
ormally
u
se the
“Speaker” setting.
When taking so
u
nd from the
LINE OUT
jack:
Selecting the “Line O
u
t” Master EQ setting changes
to
LINE OUT
tim
b
re. Yo
u
can m
u
te
bu
ilt-in speaker
o
u
tp
u
t
b
y selecting “Off” for the Speaker O
u
t setting.
If yo
u
want to take so
u
nd from the
LINE OUT
jack
and o
u
tp
u
t it from the
bu
ilt-in speakers at the same
time, select “Speaker” for the Master EQ setting and
adj
u
st the
LINE OUT
tim
b
re on the external device
yo
u
are o
u
tp
u
tting to.
• Whenever connecting a device to the Digital Piano,
first
u
se the
VOLUME
controller to set the vol
u
me to
a low level. After connecting, yo
u
can adj
u
st the
vol
u
me to the level yo
u
want.
• Whenever yo
u
connect any device to the Digital
Piano,
b
e s
u
re to read the
u
ser doc
u
mentation that
comes with the device.
Connectin
g
Headphones
Headphone Mode
PHONES
jacks
Front
Stereo standard plu
g
Connectin
g
Audio Equipment
or an Amplifier
I
N
PUT 1
I
N
PUT 2
G
u
itar amplifier
Key
b
oard amplifier, etc.
Standard pl
u
g
Standard jack
LEFT (White)
RIGHT (Red)
A
u
dio amplifier AUX I
N
jack, etc.
Pin pl
u
g
Other electronic m
u
sic
instr
u
ment,
CD player, a
u
dio player, etc.
