Controlling the Sound of a Performance
EN-45
Chorus is a function that adds depth and breadth to notes.
1.
Press
MENU
.
This displays the menu screen.
2.
Use
U
and
I
to select the 5 buttons menu that includes SYS FX.
3.
Press SYS FX.
This displays the system effect screen.
4.
Press CHORUS.
5.
Rotate the dial to select the chorus type.
Available chorus type settings are shown in the table below.
•
After you rotate the dial once to select a chorus type, you can change the selection further using
– and +.
•
To return the setting to its initial default, press – and + at the same time.
•
To go back to the previous screen, press BACK.
•
To return to the Reverb screen, press REVERB.
6.
To exit the setting operation, press EXIT.
Adding the Chorus Effect to a Tone
Setting
Display Name
Chorus setting recommended for
each tone
Tone
Chorus 1 to 6
Chorus 1 to 6
Flanger 1 to 4
Flanger 1 to 4
Содержание Casiotone LK-S450
Страница 160: ...Using a USB Flash Drive EN 159 12 When Complete appears on the display press OK...
Страница 218: ...MA2104 A...