Casio 5692, Руководство по эксплуатации, Страница: 6 / 18

Before Getting
Started...
This section provides an overview of the watch
and introduces convenient ways it can be
used.
Watch Features
●
Dual Time
Dual Time lets you keep track of the current
time in another time zone in addition to your
current location’s time.
●
Alarm
An alarm sounds whenever a time specified
by you is reached.
●
Stopwatch
Use the Stopwatch Mode to measure
elapsed time. You can also start a
stopwatch elapsed time measurement
operation with one press from the
Timekeeping Mode. Up to 120 lap time
records can be recorded in watch memory.
●
Timer
Countdown from a start time specified by
you. An alarm sounds when the countdown
reaches zero.
Note
●
The illustrations included in this
operation guide have been created to
facilitate explanation. An illustration
may differ somewhat from the item it
represents.
General Guide
① ②
③ ④
A
Hour hand
B
Minute hand
C
Second hand
D
LCD
A button
Pressing this button in the Timekeeping Mode
cycles between displays.
Holding down this button for at least two
seconds in the Timekeeping Mode displays
the setting screen.
Pressing this button while any setting screen
is displayed exits the setting screen.
B button
Pressing this button while any setting screen
is displayed will change the setting.
C button
Each press cycles between watch modes.
In any mode, hold down this button for at least
two seconds to return to the Timekeeping
Mode.
D button
Pressing this button while any setting screen
is displayed will change the setting.
In the Timekeeping Mode, press this button to
enter the Stopwatch Mode.
L button
Press to turn on illumination.
Watch Face and Display
Indicators
③ ④ ①
⑤ ⑥ ⑦ ⑧
②
⑨
A
In the Alarm Mode, the second hand
points to [ON] while an alarm or the hourly
time signal is turned on, and to [OFF] while
they are turned off.
B
Displayed during p.m. times while 12-hour
timekeeping is being used.
C
Displayed while a Stopwatch Mode lap
time measurement operation is in
progress.
D
Displayed while Auto Light is enabled.
E
Displayed while an alarm is turned on.
F
Displayed while the hourly time signal is
enabled.
G
Flashes while the watch’s hands are
shifted for easier reading.
H
Displayed while the watch is indicating
summer time.
I
In the Data Recall Mode, the second hand
points to [REC].
Watch Operation Guide 5692
6