Before Getting
Started...
This section provides an overview of the watch
and introduces convenient ways it can be
used.
●
Watch Features
●
Sunlight and artificial light generate
electricity for watch operation as it charges.
●
The watch receives a radio signal
containing time information and uses it to
keep its time setting accurate.
●
You can display the current time in any one
of 29 cities around the globe, as well as for
UTC (Coordinated Universal Time).
●
An alarm sounds whenever a time specified
by you is reached.
●
You can use the Digital Compass Mode to
determine the direction of north, and to
check your bearing to a destination.
●
You can use this mode to take an altitude
reading at your current location.
You can record the altitude, along with the
date and time of the measurement.
You can also measure the altitude
differential between two points.
●
Barometric Pressure Measurement
You can display the current barometric
pressure tendency, which helps you be on
the alert for noteworthy pressure changes.
●
The watch can be used to take current air
temperature readings.
●
You can view or delete records of altitude
measurements.
●
You can use the stopwatch to measure up
to 24 hours of elapsed time in units of 1/100
of a second.
●
Countdown from a start time specified by
you. An alarm sounds when the countdown
reaches zero.
Important!
●
This watch is not a special-purpose
measuring instrument. Measurement
function readings are intended for
general reference only.
●
Whenever using the Digital Compass
of this watch for serious trekking,
mountain climbing, or other activities,
be sure to always take along another
compass to confirm readings. If the
readings produced by the Digital
Compass of this watch are different
from those of the other compass,
perform 2-point calibration of the
Digital Compass to ensure better
accuracy.
ー
Compass readings and calibration
will not be possible if the watch is in
the vicinity of a permanent magnet
(magnetic accessory, etc.), metal
objects, high-voltage wires, aerial
wires, or electrical household
appliances (TV, computer,
cellphone, etc.)
l
●
The watch’s Altimeter Mode calculates
and displays relative altitude based on
barometric pressure readings
produced by its pressure sensor.
Because of this, altitude values
displayed by the watch may be
different from your actual elevation
and/or sea level elevation indicated for
the area where you are located.
Regular calibration in accordance with
the local altitude (elevation)
indications is recommended.
l
Note
●
The illustrations included in this
operation guide have been created to
facilitate explanation. An illustration
may differ somewhat from the item it
represents.
General Guide
④
⑤
⑥
②
①
⑦
③
A
Mode hand
B
Hour hand
C
Second hand
D
Minute hand
E
Day of the week
F
Month, day
G
Crown
A button
Pressing this button in the Timekeeping Mode
enters the Altimeter Mode.
B button
Each press cycles between watch modes.
In any mode, hold down this button for at least
two seconds to return to the Timekeeping
Mode.
C button
Pressing this button in the Timekeeping Mode
enters the Digital Compass Mode.
D button
Pressing this button in the Timekeeping Mode
cycles between displays.
L button
Press to turn on illumination.
Watch Operation Guide 5678
5
