Casio 5658, Руководство по эксплуатации, Страница: 21 / 29

Split Times and Lap Times
●
Split time
A split time is the time elapsed from the start,
up to any point along the course of an event.
D
A
A
D
Goal
Split 3
Split 2
Split 1
Start
●
Lap time
A lap time shows the time elapsed during a
specific lap around a track, etc.
D
A
A
D
Goal
Lap 3
Lap 2
Lap 1
Start
Measuring Elapsed Time
1.
Enter the Stopwatch Mode.
l
Navigating Between Modes
2.
Use the operations below to measure
elapsed time.
Stop
Resume
Stop
Start
●
Elapsed time is shown in 1/100-second
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
First hour After first hour
Minutes, seconds
1/100 seconds
Hours, minutes
Seconds
3.
Press (A) to reset the stopwatch to all
zeros.
Measuring a Split Time
1.
Enter the Stopwatch Mode.
l
Navigating Between Modes
●
If a stopwatch timing operation is in
progress, press (D) to stop it and then
press (A) to reset the stopwatch to all
zeros before performing the operation
in step 2.
2.
Press (A) to display [SPL].
●
Each press of (A) toggles between
[SPL] (split time) and [LAP] (lap time).
Minutes, seconds
3.
Use the operations below to measure
elapsed time.
●
Pressing (A) displays the elapsed time
up to that point (split time), alternating
with [SPL] for about eight seconds.
D
A
D
Stop
Split
Start
●
Elapsed time is shown in 1/100-second
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
First hour After first hour
Minutes, seconds
1/100 seconds
Hours, minutes
Seconds
4.
Press (A) to reset the stopwatch to all
zeros.
Watch Operation Guide 5658
21