Turning Off an Alarm or the
Hourly Time Signal
To stop an alarm or the hourly time signal from
sounding, perform the steps below to turn it
off.
●
To have an alarm or hourly time signal
sound again, turn it back on.
Note
●
Indicators are displayed while any of
the alarms or the hourly time signal is
turned on.
●
The applicable indicators are not
displayed while all of the alarms are
turned off and/or the hourly time signal
is turned off.
Alarm
Hourly time signal
1.
Enter the Alarm Mode.
l
2.
Use (D) to scroll through the alarm ([AL1]
to [AL5]) and hourly time signal ([SIG])
screens until the one you want to turn off
is displayed.
Alarm or hourly time signal
3.
Press (A) to turn off the displayed alarm or
the hourly time signal.
●
Each press of (A) toggles between ON
and OFF.
●
Turning off all alarms causes
(alarm) to disappear from the display.
Turning off the hourly time signal
causes
(hourly time signal) to
disappear.
4.
Hold down (C) for at least one second to
return to the Timekeeping Mode.
Note
●
If
(alarm) is still displayed after
you turn off an alarm, it means that at
least one of the other alarms is still
turned on. To turn off all of the alarms,
repeat steps 2 and 3 until the
(alarm) indicator is no longer
displayed.
Alarm Countdown Indication
30 minutes before an alarm time is reached, a
countdown start tone sounds and the function
hand starts to indicate the remaining time until
the alarm time.
Function hand
Note
●
You can use the procedure below to
enable or disable the countdown start
tone.
l
Disabling the Countdown Start
Tone
●
During a period within 30 minutes of
both an alarm time and the end of a
timer operation, the function hand
indicates the timer countdown.
Watch Operation Guide 5658
19
