2.
X
If the watch is in any mode besides the
Timekeeping Mode, hold down (C) for at
least one second to enter the
Timekeeping Mode.
3.
X
Hold down (D) for at least three
seconds. Release the button when [FIND]
starts to flash at low speed.
The phone will sound a tone when it
establishes a connection with the watch.
●
It will take a few seconds before the
phone tone sounds.
Searching for the
phone
Preparing to search
for the phone
4.
X
Press any button to stop the tone.
●
You can press any watch button to stop
the phone tone only during the first 30
seconds after it starts to sound.
Configuring Watch Settings
Alarm time, timer start time, and other settings
can also be configured using EDIFICE
Connected.
1.
Y
Tap the “EDIFICE Connected” icon.
2.
X
Hold down (C) for at least three seconds
until [CNCT] starts to flash. Release the
button when the function hand moves to
e
.
When a connection is established
between the watch and phone, [CNCT]
will stop flashing.
●
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect
Connected
3.
Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
Changing the Home City
Summer Time Setting
1.
Y
Tap the “EDIFICE Connected” icon.
2.
X
Hold down (C) for at least three seconds
until [CNCT] starts to flash. Release the
button when the function hand moves to
e
.
When a connection is established
between the watch and phone, [CNCT]
will stop flashing.
●
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect
Connected
3.
Y
Perform the operation shown on the
phone screen to change your Home City
summer time setting.
Checking the Watch Charge
Level
Use the procedure below to check the current
charge level with EDIFICE Connected.
1.
Y
Tap the “EDIFICE Connected” icon.
2.
X
Hold down (C) for at least three seconds
until [CNCT] starts to flash. Release the
button when the function hand moves to
e
.
When a connection is established
between the watch and phone, [CNCT]
will stop flashing.
●
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect
Connected
3.
Y
Use EDIFICE Connected to check the
charge level.
Recording Your Current
Location (TIME & PLACE)
While traveling or otherwise on the go, you can
use the procedure below to record your
current location, along with the time and date,
on your phone. Recorded location information
can be viewed on a EDIFICE Connected map
while the watch is connected with your phone.
●
Recording Your Current Location
1.
X
Enter the Timekeeping Mode.
l
2.
X
When you are in the location you want
to record, press (D).
This records, in phone memory, the
latitude and longitude of the location you
are in when you press the button, along
with the date and time.
●
Viewing a Recorded Location on a Map
1.
Y
Tap the “EDIFICE Connected” icon.
2.
X
Hold down (C) for at least three seconds
until [CNCT] starts to flash. Release the
button when the function hand moves to
e
.
When a connection is established
between the watch and phone, [CNCT]
will stop flashing.
●
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect
Connected
3.
Y
Perform the operation shown on the
phone screen to view recorded location
information.
Note
●
You can use EDIFICE Connected to
delete recorded location information.
Watch Operation Guide 5658
13
