Casio 5553 Скачать руководство пользователя страница 5

Battery Replacement

Leave battery replacement up to your
original retailer or authorized CASIO
service center.

Have the batteries replaced only with the
type specified in the “Specifications”. Use of
a different battery type can cause
malfunction.

When replacing the batteries, also request
a check for proper water resistance.

Ornamental resin components may
become worn, cracked, or bent over time
when subjected to normal daily use. Note
that if cracking or any other abnormality
indicating possible damage is noticed in a
watch submitted for battery replacement,
your watch will be returned with an
explanation of the abnormality, without the
requested servicing being performed.

Initial Batteries

The batteries that come loaded in your
watch when you purchase it are used for
function and performance testing at the
factory.

Test batteries may go dead quicker than the
normally rated battery life noted in the
“Specifications”. Note that you will be
charged for replacement of these batteries,
even if replacement is required within your
watch’s warranty period.

Low Battery Power

Low battery power is indicated by large
timekeeping error, by dim display contents,
or by a blank display.

Operation while battery power is low can
result in malfunction. Replace the batteries
as soon as possible.

Watch Operation Guide 5553

5

Содержание 5553


















Отзывы: