●
Switching between 12-hour and 24-
hour Timekeeping
You can specify either 12-hour format or 24-
hour format for the time display.
1.
Enter the Timekeeping Mode.
l
2.
Hold down (A) for at least two seconds.
Release the button when [SET] starts to
flash.
3.
Press (C) twice.
This causes [12H] or [24H] to flash on the
display.
4.
Press (D) to select [12H] (12-hour
timekeeping) or [24H] (24-hour
timekeeping).
24-hour timekeeping
12-hour timekeeping
5.
Press (A) to complete the setting
operation.
Note
●
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
World Time
World Time lets you look up the current time
in any one of 48 cities around the globe, and
UTC (Coordinated Universal Time).
Checking World Time
1.
Enter the World Time Mode.
l
This displays your currently selected
World Time City and the current time
there.
●
You can display the date in your World
Time City by pressing (A).
World Time City
World Time
World Time City Setting
Use the procedure in this section to select a
World Time city. If you are in an area that
observes summer time, you can also
configure a summer time setting.
1.
Enter the World Time Mode.
l
2.
Use (D) to display the city you want.
●
Holding down (D) scrolls through
settings at high speed.
3.
To change the summer time setting, hold
down (A) for at least two seconds.
●
Each time you hold down (A) for at least
two seconds, the setting will toggle
between summer time and standard
time.
●
[DST] appears whenever the display
current time is summer time.
Note
●
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
●
While [UTC] is selected as the city, you
will not be able to change or check the
summer time setting.
●
The summer time setting you configure
is applied to the currently selected city
only. It does not affect other cities.
Watch Operation Guide 5553
10