Casio 5536 Скачать руководство пользователя страница 3

Displaying the Current Home City

Pressing (D) while the Timekeeping Mode
display shows information other than an alarm
countdown will display the name of the
currently selected Home City. After a while,
display will return to what was shown before
the Home City name.

To return to what was shown before the
Home City manually, press (D).

Home City

Displaying an Alarm Number (Title)

Pressing (D) while an alarm countdown is
shown will display the number (title) of the
alarm being counted down. After a while, the
alarm countdown screen will reappear.

To return to the alarm countdown screen
manually from the alarm number (title),
press (D).

Alarm Number (Title)

Shifting the Hands

Hand shift moves the hands out of the way for
easy viewing of display info.

1.

While holding down (L), press (C).

This will shift the analog hands to allow
easier reading of digital display
information.

2.

To return the hands to their normal
timekeeping positions, hold down (L) as
you press (C) again, or press (C) to
change to another mode.

Note

If you leave the watch with its hands
shifted and do not perform any
operation for about one hour, the
hands will resume normal timekeeping
automatically.

Solar Charging

This watch runs on power supplied from a
rechargeable (secondary) battery that is
charged by a solar panel. The solar panel is
integrated into the face of the watch, and
power is generated whenever the face is
exposed to light.

Charging the Watch

When you are not wearing the watch, put it in
a location where it is exposed to bright light.

While you are wearing the watch, make sure
that its face (solar panel) is not blocked from
the light by the sleeve of your clothing. Power
generation efficiency is reduced even when
the face of the watch is blocked only partially.

NO

YES

Important!

Depending on light intensity and local
conditions, the watch may become hot
to the touch when exposed to light for
charging. Take care to avoid burn
injury after charging. Also, avoid
charging the watch under high-
temperature conditions like the ones
described below.

On the dashboard of a vehicle

parked in the sun

Near an incandescent light bulb or

other source of heat

Under direct sunlight or in other hot

areas for long periods

Checking the Charge Level

In the Timekeeping Mode, the current charge

level is indicated by the mode hand.

A

Good (high charge)

B

Good (medium charge)

C

Low Battery

Operation Guide 5536

3

Содержание 5536























Отзывы: