7.
Use (D) to select the alarm type.
[DAILY]: Alarm sounds every day at the
alarm time.
[1 TIME]: Alarm sounds only once at the
alarm time.
[SCHEDULE]: Alarm sounds on the
specified date.
●
If you select [SCHEDULE] as the alarm
type, you will need to press (A) and then
use the operations described below to
specify the alarm date.
ー
(D) and (E): Use these buttons to
change the currently selected value.
ー
(C): Use this button to move the
flashing between the year, month,
and day digits.
Day
Month
Year
8.
Press (A) to exit the setting screen.
9.
Press (C) to return to the Timekeeping
Mode.
●
Example Setting
Displaying the alarm countdown in the
Timekeeping mode while the alarm settings
below are configured will always show
information about alarm number [AL1].
l
Cycling Between Timekeeping Mode
Digital Display Contents
Example 1: Meeting at 3:00 p.m. on June
30, 2019
Alarm number: [AL1]
●
Alarm type: [SCHEDULE]
●
Alarm time and date: 3:00 p.m. on June 30,
2019
Alarm numbers: [AL2] to [AL5]
●
Alarm type: [SCHEDULE]
●
Alarm time and date: Past
Example 2: Daily alarm at 9:00 a.m.
Alarm number: [AL1]
●
Alarm type: [DAILY]
●
Alarm time: 9:00 a.m.
Alarm numbers: [AL2] to [AL5]
●
Alarm type: [SCHEDULE]
●
Alarm time and date: Past
Note
●
The mode hand performs a countdown
operation when 30 minutes or less
remain until an alarm time is about to
be reached. A 10-second alarm
sounds at the alarm time. During an
alarm countdown, the mode hand
does not indicate the watch’s mode or
battery level.
●
If a [1 TIME] alarm is set within the
period from 00:01 a.m. to 00:29 a.m.,
the mode hand will start its remaining
time countdown from midnight instead
of from 30 minutes before the alarm
time. For example, if the alarm time
setting is 00:15 a.m., the countdown
will be 15 minutes long, starting from
midnight.
●
If you do not want the mode hand to
indicate the alarm countdown time,
change the alarm type setting of all five
alarms to [SCHEDULE], and set dates
that come before the current date for
all of them.
Enabling/Disabling an Alarm
or the Hourly Time Signal
1.
Press (D) to scroll through alarm numbers
([AL1] to [AL5]) and the hourly time signal
([SIGNAL]) screens until the one you want
to configure is displayed.
Alarm or hourly time signal
2.
Press (E) to toggle the displayed alarm or
the hourly time signal between on and off.
Note
●
Note that you will not be able to turn on
a [SCHEDULE] alarm whose date has
already passed.
Displaying an Alarm
Countdown
You can use the procedure below to check
how much time remains until an alarm time you
set is reached.
1.
Press (D) to scroll through alarm numbers
([AL1] to [AL5]) until the number of the
alarm you want to view is displayed.
Alarm number
2.
Press (A).
This shows the remaining time until the
time of the alarm you selected.
●
Each press of (A) will toggle the display
between the alarm time and the
remaining time until it is reached.
Alarm time
Remaining time
Note
●
The alarm countdown is shown even if
the next upcoming alarm is turned off.
●
When the time set for a [SCHEDULE]
alarm passes, the elapsed time since
the alarm time is counted up and
shown on white-on-black screen.
Elapsed time
●
As with a [SCHEDULE] alarm, when
the time set for a [1 TIME] alarm time
passes, the elapsed time since the
alarm time starts to be counted up. In
this case, however, this will switch
back to an alarm countdown from
midnight at the beginning of the next
day. This makes it easy for you to
determine whether the alarm time is
before or after the current time during
the day.
Operation Guide 5536
12