5.
Press (A).
This enables the month setting operation.
＋
−
8
9
3
4
2
5
7
1
6
10
11
12
Month
6.
Rotate the crown to change the month.
7.
Press (A).
This enables the year 10’s digit setting
operation.
＋
−
80
90
30
40
20
50
70
10
60
00
Year (10’s digit)
8.
Rotate the crown to move the second
hand to the desired setting for the year
ten’s digit.
9.
Press (A).
This enables the year one’s digit setting
operation.
＋
−
8
9
3
4
2
5
7
1
6
0
Year (one’s digit)
10.
Rotate the crown to move the second
hand to the desired setting for the year
one’s digit.
11.
On a time signal at the top of a minute,
push the crown back in.
Correcting Hand and
Day Indicator
Alignment
Strong magnetism or impact can cause the
time indicated by the hands and the day
indicator to go out of alignment. If this
happens, adjust hand and day indicator
alignment.
●
The watch corrects second hand alignment
automatically.
You can also correct hand alignment manually
using the procedure below if you notice the
following.
●
Auto second hand alignment correction is
not being performed for some reason.
●
The positions of the hour hand, minute
hand, and/or day indicator are not correct.
To correct hand and day
indicator alignment
1.
Pull out the crown to the second click.
2.
Hold down the (A) button for at least five
seconds. This should cause the second
hand and minute hand to move to 12
o’clock.
3.
If the second hand and minute hand do not
stop at 12 o’clock, rotate the crown to
move them there.
●
You can use the second hand fast
forward or fast reverse operation to
move the minute hand.
30
Crown
Minute hand
Second
hand
4.
Press (A).
Confirm that the hour hand is stopped at
12 o’clock and the date indicator is
stopped in between the today’s date and
tomorrow’s date.
●
If the hour hand is misaligned by up to
three hours at this time, go to step 5 of
this procedure.
●
If the your hand is misaligned by more
than three hours or if the indicated date
is wrong, go to step 6 of this procedure.
30
31
30
31
Hour hand
Tomorrow’s date
Today’s date
5.
Rotate the crown to align the hour hand
with 12 o’clock.
●
After the hour hand is in the correct
position, advance to step 8 of this
procedure.
6.
Hold down the (A) button for at least 2
seconds.
Confirm that the hour hand is stopped at
12 o’clock (home position) and that the
day indicator is stopped between “31” and
“1” (home position).
31
1
31
1
Hour hand
7.
If the hour hand and day indicator are not
in their home positions, rotate the crown
to move them there.
●
To move the day indicator, used the
hour hand fast forward or fast reverse
operation.
Operation Guide 5496
8
