2.
Rotate the crown to change the Dual Time
setting.
●
You can set the Dual Time in 15-minute
increments.
＋
−
Crown
Dual Time 24-hour hand
Dual Time minute hand
Dual Time hour hand
3.
Push the crown back in.
Swapping Your Current
Location Time and Dual Time
Settings
You can swap your Home Time with the Dual
Time by holding down (B) for about three
seconds.
30
30
Before swapping
n
Dual Time
Dual Time
Current location time
Current location time
After swapping
Note
●
If the small hour and minute hands
indicate a Dual Time (set with the
watch), only the time settings will be
swapped. The date is not swapped.
Stopwatch
The stopwatch can measure elapsed time up
to 23 hours, 59 minutes, 59 seconds.
Getting ready
Perform this procedure in the Stopwatch
Mode. Use (A) to navigate to the Stopwatch
Mode.
l
30
Stopwatch Mode
Measuring Elapsed Time
30
1.
Use the operations below to measure
elapsed time.
B
B
B
B
Stop
Resume
Stop
Start
nn
n
Minutes
Hours
24-hour
Seconds
2.
Press (D) to reset the elapsed time to all
zeroes.
3.
Press (A) twice to return to the Calendar
Mode.
Alarm
The watch will beep when the alarm time is
reached.
Getting ready
Perform this procedure in the Alarm Mode.
Use (A) to navigate to the Alarm Mode.
l
30
Alarm Mode
Configuring Alarm Settings
1.
Pull out the crown to the first click.
This turns on the alarm.
30
Alarm on
Crown
Minutes
Hours
24-hour
2.
Rotate the crown to change the alarm time
setting.
3.
Push the crown back in.
4.
Press (A) once to return to the Calendar
Mode.
Enabling/Disabling the Alarm
Each press of (B) toggles the alarm between
on and off.
30
OFF
ON
Stopping an Alarm
While the alarm is sounding, press any button
to stop it.
Operation Guide 5429
10