Operation Guide 5155
E-9
Calendar
Use this mode to set today’s date (month, day, day of the week).
To set the date
Month
Day of week
Day
0RESS
0RESS
(OLDDOWN
0RESS
$AY
-ONTH
$AYOFWEEK
E-8
To set the hands
In any mode, press
A
with a thin object to advance the analog time setting. Each
press of
A
advances the time by 20 seconds. Three presses advance by one minute.
Holding down
A
advances the analog setting at high speed. You can only advance
the setting. You cannot reverse it.
E-7
In the Timekeeping Mode, hold down
1.
C
until the seconds digits start to fl ash,
which indicates the setting screen.
Press
2.
B
to reset the seconds to
00
.
Press
3.
C
to move the selection to the hour digits.
Press
4.
B
to increase the hour digits.
Press
5.
C
to move the selection to the minutes digits.
Press
6.
B
to increase the minutes digits.
Press
7.
C
to move the selection to 12/24.
Press
8.
B
to toggle the timekeeping format between 12-hour and 24-hour.
Press
9.
C
to exit the setting screen.
Resetting the seconds to
x
00
while the current count is in the range of 30 to 59
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to
00
without changing the minutes.
With the 12-hour format, the
x
P
(PM) indicator appears on the display for times in
the range of noon to 11:59 p.m. and no indicator appears for times in the range of
midnight to 11:59 a.m.
With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
x
any indicator.
E-6
Timekeeping
Use this mode to set the current time. An incorrect digital time setting will cause
incorrect operation of the calendar.
To set the digital time
Hour
Seconds
Minutes
PM
indicator
Hour hand
Minute hand
0RESS
0RESS
0RESS
(OLDDOWN
0RESS
3ECONDS
(OUR
-INUTES
E-5
In any mode, hold down
x
L
to illuminate the face of the watch.
B
B
B
Alarm Mode
Dual Time Mode
Stopwatch Mode
E-4
General Guide
Press
x
B
to change from mode to mode.
B
B
Timekeeping Mode
Calendar Mode
E-3
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the digital time .............................................................................................. E-6
To set the hands ...................................................................................................... E-8
To set the date ......................................................................................................... E-9
To set the alarm time and to turn the Daily Alarm and
Hourly Time Signal on and off .......................................................................... E-12
To stop the alarm ................................................................................................... E-14
To test the alarm and select an alarm tone ......................................................... E-14
To set the Dual Time ............................................................................................. E-16
To use the Stopwatch ........................................................................................... E-18
E-2
Contents
General Guide .......................................................................................................... E-4
Timekeeping ............................................................................................................. E-6
Calendar ................................................................................................................... E-9
Alarm ...................................................................................................................... E-11
Dual Time ............................................................................................................... E-15
Stopwatch .............................................................................................................. E-18
Reference ............................................................................................................... E-19
Specifi cations ........................................................................................................ E-21
E-1
About This Manual
Button operations are indicated using the letters shown
x
in the illustration.
Each section of this manual provides you with the
x
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
MA1201-EA
Ú#!3)/#/-054%2#/,4$
