Casio 3513 Скачать руководство пользователя страница 6

Страница: 6 / 34

Indicators

②

③

④

①

⑤

⑥

⑧ ⑨ ⑩

⑦

⑫

⑭

⑬

⑪

⑮

Displayed while the watch is indicating
summer time.

Displayed during p.m. times while 12-hour
timekeeping is being used.

Displayed while Power Saving is enabled.

Displayed when the watch is in the
Sunrise/Sunset Mode.

Displayed while Auto Light is enabled.

Shows the current charge level.

Appears when the hourly time signal is on.

Shows the temperature unit being used.

Displayed while the button operation tone
is disabled.

Displayed while the snooze alarm is
turned on.

Displayed while barometric pressure
change indication is enabled.

Shows the altitude unit being used.

Shows the barometric pressure
measurement unit.

Displayed when an alarm is turned on.

Graphic display of the altitude/barometric
pressure differential.

Navigating Between Modes

Your watch has the modes shown below.

●

To return to the Timekeeping Mode from
any other mode, hold down (D) for at least
two seconds.

Timekeeping Mode

Sunrise/Sunset Mode

Data Recall Mode

World Time Mode

Stopwatch Mode

Timer Mode

Alarm Mode

Barometer/

Temperature Mode

Altimeter Mode

Compass Mode

Use the buttons in the illustration above to
navigate between modes.

Mode Overview

●

Timekeeping Mode

In this mode, the digital display shows the
current date and time.
You can also display the items below in the
upper display area by pressing (E).

●

Month, day

●

Barometric pressure graph

Day of the week, date

Month, day

Barometric pressure

graph

●

Altimeter Mode

Use this mode to take an altitude reading for
your current location.

Altitude Measurement

③

②

①

Remeasure

Altitude graph/altitude differential

Altitude

Current time

Watch Operation Guide 3513

Содержание 3513



































Результаты поиска

Содержание 3513

Отзывы:

Похожие инструкции для 3513

Бренды по названию

Популярные бренды

Casio 3513, Руководство по эксплуатации

Результаты поиска

Содержание 3513

Отзывы:

Похожие инструкции для 3513

Бренды по названию

Популярные бренды