Moving to Another
Time Zone
Use the procedure below to easily change day
and time settings of the watch to a destination
location.
●
Before Boarding
1.
Configure the World Time to the current
time at your destination.
Current time
Destination time
l
Using CASIO WATCHES to Configure
Settings
l
Using Watch Operations to Configure
Settings
2.
Disable auto time adjustment.
l
Using the Watch in a Medical Facility or
Aircraft
●
After Arriving
1.
Swap the origin time zone time with the
destination time zone time.
After swapping
Before swapping
Destination time
Destination time
l
Using CASIO WATCHES to Configure
Settings
l
Using Watch Operations to Configure
Settings
2.
Enable auto time adjustment.
l
Using the Watch in a Medical Facility or
Aircraft
3.
Adjust the time setting.
l
Triggering Immediate Time Adjustment
Stopwatch
The stopwatch measures elapsed time in
1/100-second units for the first hour, and in 1-
second units after that for up to 23 hours 59
minutes 59 seconds (24 hours).
Measuring Elapsed Time
1.
Enter the Stopwatch Mode.
l
2.
Use the operations below to measure
elapsed time.
Stop
Resume
Stop
Start
●
Elapsed time is shown in 1/100-second
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
Hour, minute, second
Minutes, seconds,
1/100 seconds
First hour
After first hour
3.
Press (A) to reset the stopwatch to all
zeros.
Measuring a Split Time
1.
Enter the Stopwatch Mode.
l
2.
Use the operations below to measure
elapsed time.
●
Pressing (A) displays the elapsed time
from the start of a race up to the point
when you pressed the button (split
time).
D
A
A
D
Stop
Split release
Split
Start
●
Elapsed time is shown in 1/100-second
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
Hour, minute, second
Minutes, seconds,
1/100 seconds
First hour
After first hour
3.
Press (A) to reset the stopwatch to all
zeros.
Watch Operation Guide 3501
22
