Casio 3459 Скачать руководство пользователя страница 19

Timer :

Measuring unit: 1 second
Countdown range: 24 hours
Setting unit: 1 second
Time up: 10-second beeper

Mobile Link :

Auto Time Correction

Time setting adjusted automatically at
preset time.

One-touch Time Correction

Manual connection and time adjustment

Phone finder

Watch operation sounds the alert sound
of the mobile phone.

World Time

Current time for approximately 300 cities
selected for the watch
Home Time/World Time swapping
Original city function (location and name
settings)

Auto Summer Time Switching

Automatic switching between standard
time and summer time.

Timer Settings
Alarm Settings
Reminder

Reminds you of anniversaries and other
important dates.

Data Communication Specifications

Bluetooth

®

Frequency Band: 2400MHz to 2480MHz
Maximum Transmission: 0 dBm (1 mW)
Communication range: Up to 2 meters
(depends on environment)

Other :

LED light, light duration setting, Full Auto
Light, Power Saving, Button operation tone
on/off, Month/day order, Day of the week
language, Auto time correction on/off

Power Supply :

Solar panel and one rechargeable battery
Battery operating time: Approximately 10
months
Conditions:

Not exposed to light under the conditions
below.
Auto time correction: 4 times/day
Alarm: Once (10 seconds)/day
Illumination: Once (2 seconds)/day
Power Saving: 6 hours/day

Specifications are subject to change without
notice.

Mobile Link Precautions

Legal Precautions

This watch complies with or has received
approval under the radio laws of various
countries and geographical areas. Using
this watch in an area where it does not
comply with or has not received approval
under applicable radio laws may be a
criminal offense. For details, visit the CASIO
Website.

http://world.casio.com/ce/BLE/

Use of this watch inside of aircraft is
restricted under the aviation laws of each
country. Be sure to follow the instructions of
airline personnel.

Safety Precautions

Z

WARNING Wireless

Inside of a medical facility or on an aircraft,
be sure to follow the instructions of persons
in charge concerning the use of radio wave
emitting devices. Electromagnetism
emitted by the watch may affect
instrumentation, which creates the risk of
accident.

Do not use this watch in the vicinity of high-
precision electronic equipment or electronic
equipment that handles weak signals.
Doing so can cause operational or other
problems with the electronic equipment,
which creates the risk of accident.

People who are fitted with a pacemaker
should keep this watch away from their
chest area. Magnetism can affect the
operation of pacemakers and other medical
devices. Should you ever start to feel any
abnormality, immediately move the watch
away from you and consult a physician

Precautions when using Mobile Link

When using this watch in combination with
a phone, keep the watch and phone close
to each other. A range of two meters is
recommended as a guideline, but the local
environment (walls, furniture, etc.), the
structure of a building, and other factors may
require a much closer range.

This watch can be affected by other devices
(electrical devices, audio-visual equipment,
office equipment, etc.) In particular, it can be
affected by operation of a microwave oven.
The watch may not be able to communicate
normally with a phone if a microwave oven
is operating nearby. Conversely, this watch
may cause noise in radio reception and the
video image of a TV.

Bluetooth of this watch uses the same
frequency band (2.4 GHz) as wireless LAN
devices, and use of such devices in close
proximity of this watch may result in radio
interference, slower communication speeds
and noise for the watch and the wireless
LAN device, or even communication failure.

Stopping Radio Wave Emission by This
Watch

The watch is emitting radio waves whenever

e

 is flashing or displayed.

In addition, the watch also connects phone
automatically four times a day to adjust its time
setting.
When in a hospital, on an aircraft, or in any
other area where the use of radio waves is not
allowed, use the operations below to stop
radio wave generation.

Stopping Radio Wave Generation

Press any button to terminate the Bluetooth
connection.

Connected

After disconnection

Disabling Auto Time Adjustment
Configure G-SHOCK Connected settings to
disable time adjustment between the watch
and phone.

l

Using the Watch in a Medical Facility or
Aircraft

Copyrights and Registered

Copyrights

The Bluetooth

®

 word mark and logos are

registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such
marks by CASIO Computer Co., Ltd. is
under license.

iPhone is a registered trademark of Apple
Inc. in the United States and other countries.

iOS is a trademark or registered trademark
of Cisco Systems, Inc.

GALAXY is a registered trademark of
Samsung Electronics Co., Ltd.

Android is a trademark or registered
trademark of Google Inc.

Other company names and product names
used herein are trademarks or registered
trademarks of their respective companies.

Operation Guide 3459

19

Содержание 3459























Отзывы: