Operation Guide 2782
1
MO040
7
-EB
Getting Acquainted
Congratulations upon your selection of this CASIO watch. To get the most out
of your purchase, be sure to carefully read this manual and keep it on hand
for later reference when necessary.
Applications
The built-in sensors of this watch measure altitude, barometric pressure,
temperature and underwater depth. Measured values are then shown on the
display. Such features make this watch useful when hiking, mountain
climbing, skin diving, or snorkeling, or when engaging in other such outdoor
activities.
For a watch with the elapsed time bezel
Rotate the elapsed time bezel to align the
mark with the minute hand.
After that, the number of minutes that elapse is
indicated by how far the minute hand has moved
from
.
Elapsed time bezel
Warning!
•
The measurement functions built into this watch are not intended for
taking measurements that require professional or industrial precision.
Values produced by this watch should be considered as reasonable
representations only.
•
This watch is intended for use up to skin diving and snorkeling. Never
use this watch while scuba diving.
•
Never operate the buttons of the watch while underwater.
•
CASIO COMPUTER CO., LTD. assumes no responsibility for any loss,
or any claims by third parties that may arise through the use of this
watch.
About This Manual
•
Button operations are indicated using the
letters shown in the illustration.
•
Each section of this manual provides you with
the information you need to perform operations
in each mode. Further details and technical
information can be found in the “Reference”
section.
•
Most of the display examples in this manual
show only the digital display, without the analog
hands, as shown in the lower illustration.
(Light)
Timekeeping Mode
Barometer/
Thermometer Mode
Depth Gauge Mode
Press
B
.
•
From the Timekeeping Mode, you can press
B
to directly enter the
Barometer/Thermometer Mode or
D
to enter the Altimeter Mode. You can
also use
B
and
D
to switch between the Barometer/Thermometer Mode
and the Altimeter Mode.
General Guide
•
The illustration below shows which buttons you need to press to navigate
between modes.
•
In any mode, press
L
to illuminate the display.
Countdown
Timer Mode
Stopwatch Mode
▲
C
Altimeter Mode
C
Press
C
.
▲
▲
Press
D
.
Alarm Mode
Hand Setting Mode
▲
▲
C
▲
Press
C
.
▲
C
▲
▲
C
Timekeeping
This watch features separate digital and analog
timekeeping. The procedures for setting the
digital time and analog time are different.
•
Whenever you need to adjust both the digital
and the analog time settings, make sure you
adjust the digital setting first.
Digital Time and Date
Use the Timekeeping Mode to set and view a
digital display of the current time and date. When
setting the digital time, you can also configure
settings for the 12/24-hour format.
Hour : Minutes
PM indicator
Seconds
Month – Day
Day of week
To set the digital time and date
1. In the Timekeeping Mode, hold down
A
until the seconds start to flash,
which indicates the setting screen.
2. Press
C
to move the flashing in the sequence shown below to select other
settings.
Year
Seconds
Hour
Minutes
Day
Month
12/24-Hour
Format
4. Press
A
to exit the setting screen.
Note
•
Resetting the seconds to
00
while the current count is in the range of 30 to
59 causes the minutes to be increased by 1. In the range of 00 to 29, the
seconds are reset to
00
without changing the minutes.
•
With the 12-hour format, the
P
(PM) indicator appears on the display for
times in the range of noon to 11:59 p.m. and no indicator appears for times
in the range of midnight to 11:59 a.m.
Setting
Seconds
Hour, Minutes
12/24-Hour
format
Year, Month,
Day
Button Operations
Press
D
to reset the seconds to
00
.
Use
D
(+) and
B
(–) to change the setting.
Use
D
to toggle between 12-hour (
12H
)
and 24-hour (
24H
) timekeeping.
Use
D
(+) and
B
(–) to change the setting.
Screen
3. When the setting you want to change is flashing, use
D
and/or
B
to
change it as described below.
•
With the 24-hour format, times are displayed in the range of 0:00 to 23:59,
without any indicator.
•
The 12-hour/24-hour timekeeping format you select in the Timekeeping
Mode is applied in all modes.
•
The year can be set in the range of 2000 to 2039. The day of the week is
calculated automatically in accordance with the date you set.
•
The watch’s built-in full automatic calendar automatically makes allowances
for different month lengths and leap years. Once you set the date, there
should be no reason to change it except after you have the watch’s battery
replaced.
