CASELLA CEL CEL-62 Series, Руководство оператора

Страница: 16 / 37

Casella CEL 16
H. VIEW MEMORY RESULTS (Refer to Figure 10)
This is where the results from completed runs are stored. The Runs are stored in a
chronological order, with the latest run at the top of the list.
MEMORY RESULTS
From the Menu screen use the Cursor Keys (C) to navigate to the Memory Results icon
(1). Press
Select (B) to access the memory.
From the chronological list of Runs stored use the Up/Down Cursors Keys (C) to select
a Run. When a Run has been selected, press Select (B).
This screen gives the operator the choice to view the selected a Run, or to delete it. Use
the Cursor Keys (C) to navigate to the View Results icon (2) and press
Select (B).
The Results screen displays an overview of measurement data for the selected a Run.
This is read only. To see the specific results, press
View (B).
Figure 10 View Memory Results (Sheet 1)
The Octave values (CEL-62XB and C models only) saved in the Results are displayed in
a graphical format. Use the
Left/Right Cursor Keys (C) to move the cursor (1) across
the graph. Each graph bar represents an octave band measured in Hz or KHz.
Use the Up/Down Cursors Keys (C) to toggle between parameters such as L
MAX
and
L
AEQ
(2).
To view the numerical results (CEL-62XB and C models only), press View (B).
On CEL-62XC models, use the Up/Down Cursors Keys (C) when viewing numerical
results to alter the frequencies viewed.
Press Exit (A) to leave the Results or View (B) to cycle the Results screens again.
Note: On CEL-62XC models either 1/1 octave values or 1/3 octave values will be
displayed dependent on the setup at the time of measurement.