WX210 - WX240
SAFETY INSTRUCTIONS
0 - 15
Accident Prevention when reversing and slewing
Any person in the immediate vicinity
of the machine may be hit or run
over when the machine is being
reversed or the superstructure is
being slewed. This may result in
severe, potentially fatal injury.
To prevent accidents during revers-
ing and slewing:
-
Enlist the assistance of a mar-
shaller if your view is restricted.
-
Always look in all directions before
reversing or slewing. Make sure
there is no one in the immediate
vicinity.
-
Keep the acoustic reversing alarm
(if present) in a good operating
state.
-
Always be prepared for the possi-
bility of persons entering the haz-
ard zone. Use the horn or another
signal to warn any persons in the
immediate vicinity.
-
Enlist a marshaller for reversing if
your view is restricted. Always en-
sure that the marshaller is within
sight.
-
The machine must not be moved
until agreement has been reached
with the marshaller on correct in-
terpretation of the signals.
-
Familiarize yourself with the mean-
ing of all markings, signs and des-
ignations used in the operation
and come to an agreement on them
with the marshaller.
-
Keep windows, mirrors and head-
lamps clean and in good order.
-
Dust, heavy rain, fog, etc. may
reduce visibility. If this is the case,
reduce your speed and switch on
appropriate lighting.
Read the Owner’s Manual carefully.
Fig. 10
Fig. 11
Î
Carefully read personal and machine SAFETY INSTRUCTIONS (at the beginning of this manual)
