Case SV208D, Руководство по обслуживанию

Страница: 16 / 31

INTRODUCTION
Seat belts
Seat belts must be worn at all times.
Seat belt inspection and maintenance:
• Keep seat belts in good condition.
• Keep sharp edges and items than can cause damage away from the belts.
• Periodically check belts, buckles, retractors, tethers, slack take-up system, and mounting bolts for damage and
wear.
• Replace all parts that have damage or wear.
• Replace belts that have cuts that can make the belt weak.
• Check that bolts are tight on the seat bracket or mounting.
• If the belt is attached to the seat, make sure that the seat or seat brackets are mounted securely.
• Keep seat belts clean and dry.
• Clean belts only with soap solution and warm water.
• Do not use bleach or dye on the belts because this can make the belts weak.
To fasten the belt:
1. Sit in the operator’s.
2. Adjust the seat so all controls are easily accessible
and operator comfort is achieved.
3. Pull the seat belt cross your lap and insert the metal
end into the latch mechanism until a click is heard.
4. Make sure that belt lays flat across the operator lap
and it is secure in the latch mechanism.
To release the belt:
Press the red release button on the buckle and guide the
retractable belt back into the reel. SS12C077
1
48150518 26/02/2018
11