Case FARMALL 105U EP, Руководство по обслуживанию

Страница: 52 / 61

Engine - Exhaust Gas Recirculation (EGR) - Diesel Particulate Filter (DPF) exhaust treatment
Diesel Particulate Filters (DPF) - Remove for periodic replacement
1. Using the lever (1) pull up the steps, take off the cover
(2) , then disconnect the battery negative cable.
MOIL12APL91
1
2. Use the lever (1) to open the hood.
3. Remove the hood (2) , as described in Hood - Remove
(90.100) .
WLAPL4S90C133A
2
4. Loosen the clamp of the connection pipe (1) between
the air cleaner (3) and turbine, unscrew the retaining
screws of the air intake pipe (2) then slide it towards
the front so that it comes out of the filter inlet. Then, af-
ter disconnecting the clogged filter sensor connection,
remove the filter from the bonnet support.
MOIL12APL111
3
5. Disconnect the connectors on the pressure differential
sensor (1) , on the two temperature sensors and on the
lambda sensor, unscrew the system heat shield (2) and
position everything on the left-hand side of the engine.
MOIL12APL113
4
47841819 24/02/2015
10.3 [10.501] / 11