Case CX300C, Руководство оператора

Страница: 104 / 288

3 - CONTROLS/INSTRUMENTS
Function cancellation lever and safety bar
WARNING
Unexpected machine movement!
Before leaving the operator's compartment,
the function cancellation lever must be in the
central position and the safety bar must be in
the inward position.
Failure to comply could result in death or se-
rious injury.
W0223A
The safety bar (1) is designed to prevent the operator from
leaving the operator’s compartment without first having
retracted the safety bar into the left-hand control arm.
The lever (2) operates the safety bar (1) and cancels the
functioning of the control levers and pedals. When the
lever
(2) is in central position, the safety bar (1) is in inward
position in the control arm and the attachment, travel and
swing functions cannot be operated.
ATTENTION: The engine must be started with the safety
bar retracted. If the safety bar is extended, it is not possi-
ble to start the engine.
NZIMV6-001
1
To make the attachment, travel and swing functions oper-
ational once more, push the lever
(2) forward for the safety
bar (1) to come out of the control arm.
NOTE: It is also possible to cancel all controls by com-
pletely raising the left-hand control arm. Pull the lever (2)
backward.
NZIMV6-002
2
3-54