Case CX235C SR, Руководство оператора

Страница: 247 / 292

6 - MAINTENANCE
Cab protection (ROPS and FOPS) (optional)
Service specifications
Check: Every 250 hours (after the first 50 hours during the run-in period)
Maintenance and checks
Check the retaining hardware, if necessary retighten the
screws.
Check the absence of cracks, rust or holes in the pro-
tective structure and the components that constitute it.
Ageing, bad weather and accidents can cause damage.
If you have even the slightest doubt regarding the con-
dition of the structure, consult your CASE CONSTRUC-
TION Dealer.
If the protective structure has suffered any accident, it
is necessary to replace the damaged components of the
structure in order to restore the initial protection, consult
your CASE CONSTRUCTION Dealer.
27B3D19B
1
Machine inspection and cleaning
Service inspections
Inspect and clean: Periodically
Or whenever oil or grease has been spilt on the machine.
Do not use compressed air if there is oil or soot in the element.
Take the opportunity during this operation to make a visual check of all the welded components (in case of appearance
of cracks), the attachment linkages and check the teeth and tooth tips for correct retention and for wear. Look for any
leaks and check the condition of all pipes and hoses.
Checking the machine settings
Service specifications
Have this checked by your CASE CONSTRUCTION Dealer: Every 6 months
6-63