background image

TO PREVENT ACCIDENTS

Most of the accidents and injuries occurring in the factory, at home or on the road are caused by the failure to

follow simple and fundamental safety rules or precautions. For this reason, MOST ACCIDENTS CAN BE

PREVENTED by recognizing the real cause and taking the necessary precautions before the accident occurs.
With any type of machine, although well designed and constructed, it is not possible to absolutely exclude any

possibility of accidents.
A careful and cautious operator and/or technician is the best insurance against accidents. The scrupulous

observance of this one simple rule would prevent many thousands of serious injuries each year. 
This rule is: never attempt to clean, lubricate or service a machine with the engine running.

S

WARNING

Before carrying out any maintenance, adjustment or repair operation on machines equipped with attachments,

controlled hydraulically or mechanically, make sure that the attachment is lowered and safely set on the

ground. If it is necessary to have the attachment partially or fully raised to gain access to certain items, make

sure the attachment is suitably supported by means other than the hydraulic lifting cylinders, the cables and/or

the mechanical devices used for controlling the attachment.

CNH S.p.A.

Viale delle Nazioni, 55

41100 MODENA - Italy

All rights reserved.

Reproduction of text or illustrations, in whole or in part, is strictly prohibited.

Find manuals at https://best-manuals.com

Содержание CX17B










































Отзывы: