Case CX130C, Руководство оператора

Страница: 188 / 282

6 - MAINTENANCE
Track rollers and idler wheels
Visually check the track rollers and the idler wheels every 250 h
Floating seals are used on the upper/lower roller and
the idler wheel. Although they endure enough until the
average overhaul timing, visually check for oil leaks be-
fore work. If there is any oil leak, the components need
to be replaced. Consult the CASE CONSTRUCTION
dealer.
MCHP8N-004A
1
Cab protection (ROPS and FOPS)
Check the cab protection every 250 h (after the first 50 h during the run-in period)
Check the retaining hardware, if necessary
retighten the screws.
Check the absence of cracks, rust or holes in the
protective structure and the components that con-
stitute it. Ageing, bad weather and accidents can
cause damage.
If you have even the slightest
doubt regarding the condition of the structure, con-
sult your CASE CONSTRUCTION Dealer.
If the protective structure has suffered any acci-
dent, it is necessary to replace the damaged com-
ponents of the structure in order to restore the initial
protection, consult your CASE CONSTRUCTION
Dealer.
LEC4DA-001A
1
6-38