Case CX130C, Руководство оператора

Страница: 14 / 282

1 - GENERAL INFORMATION
Operator's manual storage on the machine
Always keep the manual in the location provided for that
purpose (behind the operator’s seat). Make sure it is al-
ways complete and in good condition. If you wish to ob-
tain extra copies, or copies in languages other than that of
the country of use, consult your CASE CONSTRUCTION
Dealer.
YLNR3P-002
1
Machine orientation
The terms "Right-hand", "Left-hand", "Front" and "Rear"
are used in this manual to indicate the sides as they are
seen from the operator's seat when the cab is over the
idler wheels.
NOTE: the illustration shows the machine in normal travel
position. In normal travel position, the cab is over the
idler wheels. The travel reduction gears are at the rear
of the upperstructure. This manual uses the terms “right”,
“left”, “front” and “rear” to show the side viewed from the
operator's seat when the cab is located above the idler
wheel.
A. Front
B. Rear
C. Right-hand side
D. Left-hand side
E. Travel motor
F. Idler wheel
SMIL20CEX1395BB
1
1-8