Case Alpha Series Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 61

background image

Engine - Engine and crankcase

Engine - Remove

SR270 TIER 4B (FINAL) [NFM481941 - ]

NA

SV300
TR340 TIER 4B (FINAL) [NFM482972 - ]

NA

TV380

WARNING

Avoid injury! Always do the following before lubricating, maintaining, or servicing the machine.
1. Disengage all drives.
2. Engage parking brake.
3. Lower all attachments to the ground, or raise and engage all safety locks.
4. Shut off engine.
5. Remove key from key switch.
6. Switch off battery key, if installed.
7. Wait for all machine movement to stop.
Failure to comply could result in death or serious injury.

W0047A

WARNING

Fire hazard!
When handling diesel fuel, observe the following precautions:
1. Do not smoke.
2. Never fill the tank when the engine is running.
3. Wipe up spilled fuel immediately.
Failure to comply could result in death or serious injury.

W0099A

WARNING

Escaping fluid!
Hydraulic fluid or diesel fuel leaking under pressure can penetrate the skin and cause infection or
other injury. To prevent personal injury: Relieve all pressure before disconnecting fluid lines or per-
forming work on the hydraulic system. Before applying pressure, make sure all connections are tight
and all components are in good condition. Never use your hand to check for suspected leaks under
pressure. Use a piece of cardboard or wood for this purpose. If injured by leaking fluid, see your
doctor immediately.
Failure to comply could result in death or serious injury.

W0178A

WARNING

Heavy objects!
Lift and handle all heavy components using lifting equipment with adequate capacity. Always support
units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders.
Failure to comply could result in death or serious injury.

W0398A

Prior operation:

Tilt the ROPS.

Prior operation:

Disconnect the battery.

Prior operation:

Drain the coolant.

Prior operation:

Drain the engine oil.

Prior operation:

Evacuate the A/C system (if equipped).

47685161 24/06/2015

10.1 [10.001] / 4

«
...
31
32
33
34
35
...
»

Содержание Alpha Series






























































Отзывы:

Нет отзывов

Похожие инструкции для Alpha Series

Бренд: Takeuchi Страницы: 447

Бренд: MultiOne Страницы: 80

Бренд: Toro Страницы: 8

Бренд: Toro Страницы: 16

Бренд: Toro Страницы: 16

Бренд: Toro Страницы: 16

Бренд: ASV Страницы: 28

Бренд: ASV Страницы: 71

Бренд: ASV Страницы: 72

Бренд: ASV Страницы: 85

Бренд: ASV Страницы: 98

Бренд: ASV Страницы: 95

Бренд: ASV Страницы: 117

Бренд: ASV Страницы: 146

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды