Case 721G Stage IV, Руководство оператора

Страница: 302 / 522

7 - MAINTENANCE
Engine oil (Initial) - Change
Change the engine oil and filter when the machine is new and the hourmeter registers 100 hours.
Change the engine oil and filter every 500 hours thereafter or more frequently when the engine operating conditions
are severe.
Prior operation:
Keep all non-authorized personnel clear of the area. Park the machine on a firm, level surface in neutral with the
parking brake applied. Lower the bucket/attachment to the ground. Turn off the engine. Install the transport/service
link into the locked position.
Service specifications
Type of oil CASE AKCELA UNITEK 10W-40
CASE AKCELA UNITEK SSL 0W-40
(cold weather)
Capacity (with filter change) 13.25 l ( 14 US qt )
NOTE: it is recommended to replace the engine oil filter when you change the engine oil.
1. Raise the engine hood. Remove the dipstick (1) .
NOTE: when changing the engine oil, the oil flow rate is
improved if you remove the oil fill cap or the dipstick from
the engine while draining, and the oil is slightly warm.
RCPH10WHL899AAH
1
2. Remove the remote drain cover to access the engine
oil drain (if equipped).
LEIL17WHL1597AB
2
3. Locate the engine oil remote drain. Use a suitable con-
tainer to collect the used oil. Drain the engine oil com-
pletely.
4. Close the remote drain.
LEIL16WHL0198AA
3
7-64