Case IH Magnum 250, Руководство по обслуживанию

Страница: 37 / 81

Engine - Engine and crankcase
Engine - Install
Prior operation:
Engine - Remove (10.001)
1. If removed, install the front engine mounting brackets
(1) .
2. Torque the four mounting bolts (2) to 101 - 113 N·m ( 75
- 83 lb ft ).
3. Torque the ISO mount support bolt nut (3) to 160 -
220 N·m ( 118 - 162 lb ft ).
RCPH10CCH833AAB
1
4. Install the right (shown) and left rear engine ISO
mounts.
RCPH07CCH166AAB
2
5. Properly support the engine. Raise and move the en-
gine into the front support frame.
RAIL13TR04248AA
3
6. Install the holding plate (1) for the right rear engine
mount with the bolts (2) removed earlier.
7. Torque the bolts to 125 - 150 N·m ( 92.2 - 110.6 lb ft ).
8. Install the bolts (3) removed earlier, and torque to 125
- 150 N·m ( 92 - 111 lb ft ).
9. Install the hood support bolt and washer (4) and torque
to 125 - 150 N·m ( 92 - 111 lb ft ).
RCPH10CCH925AAB
4
47685447 10/05/2014
10.1 [10.001] / 11