Case Communications Mayze 24, Справочное руководство, Страница: 97 / 166

%C2 Data compression Data compression
enabled for disabled.
transmitted data only.
%C3 Data compression Data compression
enabled for received enabled.
data only.
The data compression technique used depends on the setting of the
–E
command.
D Dial a Number
This command is used to dial a specified telephone number with, if
required, special instructions (known as modifiers).
Dnn where nn is the telephone number
To dial a number with no modifiers, enter the number you want to
dial immediately after the command, e.g.
ATD0123456789 .
To dial a number with modifiers, select the required modifiers from
the list below, and incorporate them in the dialling sequence as
instructed.
An example of a number with modifiers would be to dial through a
PABX where the prefix to an outside line is 9, and a pause is needed
before the number, e.g.
ATD9,0123456789
.
In the default setup, you can abort a dialling command by pressing
any key on the keyboard (see
''H command).
Dialling Modifiers
P
Pulse Dial
T Tone Dial
These modifiers select pulse or tone dialling. They can be
inserted at any required point in the dialling string, which is
useful where switchboards use a different prefix dialling mode.
X460-306851 Issue 1 8-5 Rev.0