manualshive.com logo in svg

Case Communications Mayze 24, Справочное руководство, Страница: 93 / 166

Поделиться
Скачать
Case Communications Mayze 24 Скачать руководство пользователя страница 93

8

The AT Commands

This chapter contains a description of all the AT commands that are
incorporated in your modem.  The commands are listed alphabetically,
with symbols in the following sequence:

&

*

/

% ''

–

Full instructions for entering AT commands are given in Section 3.3.

In addition to the commands that must have the AT prefix, there are two
which do not require the prefix or the terminator:

+++

Escape Sequence

You must enter this sequence when your modem is on-line and you
intend to use the main DTE to enter commands.

d+++d

where

 d

 is a period of silence defined in S-register

S12.  Its factory default is 0.5 seconds.

This sequence will produce the response 

OK

, put the modem into

command mode, and keep the current call live.

To return to the on-line mode, use the 

O

 command, or to clear the

call use 

H

.

Note that the 

+

 character can be changed by altering the contents

of S-register S2.

A/

Repeat Last Command(s)

This sequence will cause the modem to repeat the previous
command or command string.

X460-306851 Issue 1

8-1

Rev.0

Содержание Mayze 24







































































































































































Отзывы:

Нет отзывов