Case Communications Mayze 24 Скачать руководство пользователя страница 165 | Manualshive

Страница: 165 / 166

Case Communications Mayze 24 Скачать руководство пользователя страница 165

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

Link boxes are drawn on the PCB as

but the positions are not

marked.

The link positions are:

a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a

POSITION 1

a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a

POSITION 2

Links 4 and 6:

Position 1

–

The command port is connected to the Network 16
Controller (default).

Position 2

–

The command port is connected to Pins 14 and 16 of the
DTE connector on the rack.

Link 3:

Not Fitted (default). Test indicate on Pin 25.

Position 1

–

Busy out on Pin 25.

Position 2

–

Test Indicate on Pin 25, AL on Pin 18.

Link 5:

Not fitted (default). Pin 23 not connected.

Position 1

–

Speed select on Pin 23.

Position 2

–

Speed indicate on Pin 23.

Links 1 and 8 are for factory use only and must not be changed.

Link 7 must be in Position 1 to enable Battery Back Up.
Link 2 must be in Position 1 to enable the Watchdog function.

D.3.4 Line Connection

In addition to the modem you need a four-way (BT 4/502) or six-way (BT
6/502) linecord.

The modem is connected to the PSTN or leased line using the terminals on
the rear panel of the rack and a linecord. Connect the cord to the terminals
before plugging the other end into the BT socket.

X460-306851 Issue 1

D-7

Rev.1

«
...
163
164
165
166
»

Содержание Mayze 24







































































































































































Отзывы:

Нет отзывов