manualshive.com logo in svg

Case Communications Mayze 24, Справочное руководство, Страница: 113 / 166

Поделиться
Скачать
Case Communications Mayze 24 Скачать руководство пользователя страница 113

when using V.22bis or V.22 communications format.  (DTR low
means that the DTE is not ready, high means that the DTE is
ready.)

&Q0

Asynchronous mode.  DTR is ignored.  Default.

&Q1

Synchronous mode.  The modem will answer and dial
with DTR low, but will disconnect if DTR does not go
high after the time defined in S-register S25.  When on-
line, if DTR goes low, the modem will wait for S25 time
before the call is disconnected.

&Q2

Synchronous mode.  When DTR goes high, the modem
dials the stored telephone number held in location 

N0

.

When on-line, if DTR goes low, the modem disconnects.

&Q3

Synchronous mode.  The modem will not dial or answer
when DTR is low.  When on-line, if DTR goes low, the
modem disconnects.  DTR conforms with ITU-T circuit
108/2.

&Q4

Asynchronous mode.  The modem will answer or dial
with DTR low, but will disconnect if DTR does not go
high after the time defined in S-register S25.  When on-
line, if DTR goes low, the modem will wait for S25 time
before the call is disconnected.

&Q5

Asynchronous mode.  When DTR goes high, the modem
dials the stored telephone number held in 

N0

.  When

on-line, if DTR goes low, the modem disconnects.

&Q6

Asynchronous mode.  The modem will not dial or
answer when DTR is low.  When on-line, if DTR goes
low, the modem disconnects.  DTR conforms with ITU-
T 108/2.

&Q7

Command mode switch.  An on-to-off transition on the
DTR line causes the modem to switch from command
mode to on-line mode.

&Q9

An on-to-off transition on the DTR line causes the
modem to default to user configuration 0.

&Q10

Synchronous mode.  This conforms to V.24 108/1
(CDSTL, Connect DataSet To Line).  When DTR goes
high the modem goes on-line, and when it goes low it
disconnects.

&Q11

Asynchronous mode.  This conforms to V.24 108/1
(CDSTL, Connect DataSet To Line).  When DTR goes
high the modem goes on-line, and when it goes low it
disconnects.

X460-306851 Issue 1

8-21

Rev.1

Содержание Mayze 24







































































































































































Отзывы:

Нет отзывов