manualshive.com logo in svg

Case Communications Mayze 24, Справочное руководство, Страница: 112 / 166

Поделиться
Скачать
Case Communications Mayze 24 Скачать руководство пользователя страница 112

%P

Pass-Through Flow Controls

This command is only effective when flow control 

%U

 and/or 

%K

 is

selected.

%P0

Pass through disabled.  Default.

%P1

The modem will pass XONs down the line to the
remote modem.

%P2

The modem will pass XOFFs down the line to the
remote modem.

%P3

The modem pass XONs and XOFFs down the line to the
remote modem.

The various settings allow you to choose which flow control
characters received from the DTE (XONs stored in S39, S41 and
S49, and XOFFs stored in S40, S42 and S50), will be sent to the
remote modem.  The character will be sent transparently in
sequence with the data for the 

%P1

,

 2

,

 3

 settings.  (The modem will

also respond to flow control characters according to the setting of
the 

%U

 command regardless of the setting of this command).

Q

Quiet Mode

This command determines whether response codes are sent to the
DTE when commands are executed.  The full response code table is
given with the 

X

 command.

Q0

Response codes are sent.  Default.

Q1

Response codes are not sent.

Q2

Response codes are not sent in answer mode and 
are sent in originating mode.

Q3

Response codes are not sent while the modem is on-
line.

Q2

 is useful when a DTE would get confused seeing response codes

in answer mode, but still requires results for dialling or
configuration.

&Q

Sync/Async Mode and DTR Control

This command has two purposes: the first is to switch the modem
between synchronous and asynchronous mode, the second is to
determine how the modem interacts with the DTR (Data Terminal
Ready) signal from your DTE.  Synchronous modes are only valid

X460-306851 Issue 1

8-20

Rev.0

Содержание Mayze 24







































































































































































Отзывы:

Нет отзывов