Case Communications Mayze 24, Справочное руководство, Страница: 110 / 166

where
nnnnnnnnnnn
is the telephone number to be dialled, and
pppppppp is the security password.
See Section 5.9.
<Ctrl-I> Store a Password and a User ID
For dialling into a level 2 modem (rackmounted), it is necessary
to program the access security password and user ID in a stored
telephone number string.
The format for this is:
ATDnnnnnnnnnnn<CTRL-I>uuupppppppp<CR>
where:
nnnnnnnnnnn
is the telephone number to be dialled,
uuu
is the user ID, and
pppppppp
is the security password.
See Section 5.9.
&N Display/Delete Telephone Directory
This command will display your complete telephone directory.
&N
Your telephone directory is displayed like this:
N0
-
T9, 0123 456789
N1 - : Head Office : T9, 0123 987654
N3 - : Northern Office : T9, 0987 654321
N11
-
: USA
:
N20 - P0987 123456 – Z2
The locations are designated N0 to N50. Empty locations are not
listed. In this example only five directory locations have numbers
stored in them, and directory entry N11 is a secure number.
&N99
will clear all entries in the telephone directory.
O Return to On-Line
This command is only needed if you are using the data DTE for
commands, and have previously entered the escape sequence
(default
+++
) to interrupt a communications session.
X460-306851 Issue 1 8-18 Rev.0