Heat Manager Pro User Manual V1.5 Page 15
1.2
P
RINCIPLE OF OPERATION
To fully understand the Heatmanager Pro operation we will first illustrate this by means of this
schematic diagram that shows you the steps to take.
The operation cycle is as follows:
First we set each channel to the desired function (programmer, slave etc.) and program the
desired profile in the programmer(s). So the system goes forth between 1 and 2 until all 12 (or
6) channels are correctly configured.
After this configuration phase we can go to the
OPERATION
screen and start the channels that
we wish to use. The actual temperature control process will now start. The actual status can be
followed on the operation screen and on various other monitoring screens.
During operation we also want to see how the process is running in a graphical way. For this we
can go to the
TREND
. Here we can view the process graphically.
If desired, we can export the data at the end of the process as a .CSV file to a USB stick and
import it into a pc with (e.g.) Microsoft Excel or the free downloadable Openoffice Calc.
We do this by selecting the BASIC SETTINGS/
COPY DATA
menu item in the main menu.
1. CHANNEL
SET
2. PROFILE
SET
(programmer)
3.
OPERATION
4. TREND
5. EXPORT-
DATA >USB
(.CSV)
