Cascade TEK CTVR522-H, Инструкция по установке и эксплуатации

Страница: 38 / 56

38 | P a g e
OPERATION
P
UT THE
O
VEN INTO
O
PERATION
Perform the following procedures and steps to put the unit into operation after installing it in a new
workspace environment.
The oven is now ready for use.
1
.
Turn on the oven
Optional:
Back up the Oven Controller
The manufacturer recommends backing up your oven controller
configuration. See the Log In procedure on page 39 and the File
Export – Import procedure on page 40.
2.
Set the Oven Limit temperature
Perform the Set the Oven Limit (OTP) Temperature
procedure on page 41.
3.
Verify the oven vacuum integrity
Use the Pump Down the Oven Chamber procedure on page
43 to pump down and hold the oven chamber under vacuum
for a minimum of 10 minutes to verify the integrity of the
vacuum system.
4.
Review how to set Operating Temperatures
Set the constant temperature setpoint , page 47.
Or
Program multistep heating recipe profiles , page 48.
Note: The oven chamber should always be under vacuum
prior to heating.
10 Minutes Minimum