26
Device name:
change the device name to what you want.
User name:
default user name: admin, the user name is the same as the NVR
Password:
input the password (the password should be exactly the same as what you have set
on NNR).
Channel number:
select the channel number, this means the total channel which the App will
display.
If your only have 4 cameras, you can choose 4 channel display.
If you add more cameras to the system, you can choose 8-CH.
Then tap
Complete
on the top of the surface to finish upon setting. Then your device will be
added successful.
8.2.2 Operating the App
You can operate the App through below icons:
a)
My Device surface
Tap
to load the live view screen. App supports live view in QUAD
mode or SINGLE view mode. It can also display 8 channels at the same time.
Tap and hold it to talk with the person in front of the camera.
Tap it to switch the viewing mode from QUAD and SINGLE view.
You can also switch the view mode by double tapping the screen.
Tap it to catch a screenshot.
Tap it to start the recording, tap again to stop the recording.
Tap it playback the recorded files.
Tap it to add new camera.
Tap it to enter view Screenshot/Recording file, Edit the device or Delete the
device.
