22
7.5 Motion & Alarm
Click
, to enter the video detection setting.
Select the channel you want to set.
Set the sensitivity of the VMD sensor: Highest-High-Medium-Low-Lowest
Highest: motions are more easily detected.
Lowest: motions are least easily detected.
PIR enable: default value is selected.
NOTE
: Motions except human actions, such as shades of trees etc also will be detected then alarm,
select PIR enable will decrease those alarm.
Select the alarm interval
You can select from 1 minute, 3 minutes, 5 minutes, 10 minutes, 30 minutes or off.
Click
Alarm Schedule
, to enter it.
Select SET or CLEAR to select/clear the block(s).
(Vertical: Monday-Sunday. Horizontal: from 1:00-24:00)
Yellow: selected, NVR will alarm once motion is detected.
Blank: unselected, NVR will not alarm even motion is detected.
Please note: If you have set up the Alarm Schedule, it is effective on both NVR alarm and
remote notification. The remote app will not receive push notification outside the alarm schedule.
Click
Mask Area
to select the mask area, once selected,
*Grey = Unmasked
*Black = Masked, means
this area will not be detected even with motion or person.
Default all unmasked
Left click to enable/disable mask area
Right click to enter menu: Fill all / Mask all / Return
