18
2
Click
to add a camera from another 3 cameras.
For example, click
on the right of CH1, then select CH4. That means, CH4 will transmit the signal
through CH1, finally transmit to NVR. Bring both cameras near the NVR to set up the repeater feature.
3
Click
Aplply
or
OK
to save the setting, click
Refresh
to refresh the connecting datas.
Click
Cancel
to return to previous screen.
NOTE
:
You can repeat MAX 2 cameras for a repeater connecting.
4
Delete the repeater camera.
Move the cursor to the CH you want to delete, click the left key of the mouse, then click
Apply
or
OK
to
save the setting, click
Cancel
to quit the setting.
NOTE
:
Make sure the camera is powered on before setting.
Make sure the bridge camera is working normally (within the signal transmitting range), otherwise the
repeater function won’t work.
7.2 Record
Click
to enter record setting surface.
Channel
