6
FAN PREPARATION
Step 4.
Remove the motor warning shield from the top of
the motor assembly. Set aside for use later during the
installation.
M
O
TO
R
SH
IEL
D
LEA
VE I
N PLAC
E UNTIL INSTA
LLATI
ON
AN
D
W
IR
IN
G
CO
M
PL
ET
E
RE
M
O
VE
THIS
SHIELD
W HEN INSTALLAT
IO N
IS
CO
M
PL
ET
E
CAUTION
DAMP LOCATION RATED FANS
REQUIRE A GROUND FAULT INTERRUPTER (GFI)
USE A WEATHER PROOF OUTLET BOX
PROPERLY CONNECT GROUND WIRES
USE ONLY UNDER A WEATHER
PROOF STRUCTURE
DANGER
IT IS IMPERITIVE THAT THE LOCKSCREW
BE SET TIGHTLY AGAINST THE DOWNROD
THREADS AFTER FAN IS ASSEMBLED
FAILURE TO DO SO WILL CAUSE FAN TO FALL
TIGHTEN
LOCKSCREW
TIGHTEN
LOCKSCREW
INSTALLER
GIVE THIS TAG TO THE
CONSUMER AFTER
INSTALLATION COMPLETE
INSTALLER
CONFIRM LOCKSCREW
IS PROPERLY TIGHTENED
DO NOT OIL SEALED BEARINGS!
P/N 1942640 SRB4/96
Step 5a.
Remove the motor shipping blocks by turning the
motor to the opening slot in the motor adaptor plate as
shown.
Step 5b.
Use the provided screwdriver to turn screws
counterclockwise to loosen and remove. Repeat for all
shipping blocks. Discard shipping blocks and screws as they
will not be reused.
Step 5c.
Remove shipping block warning label and discard.
